acrylic aquarium manufacturers
Leyu
LY202372914
Mitsubishi Corporation Lucite brand acrylic raw material
20-800mm
Ocean Park, Hotel, Shopping Center, Theme Park, Zoo
Wooden box, iron frame
Provide technical guidance and on-site installation services
Transparency reaches 93%
Can customize cylindrical cylinders of different sizes
Uvioresistant
5000 tons
Clear transparency, 93%
Custom
| Availability: | |
|---|---|
Product Description
Daily cleaning: Use microfiber cloth, clean water / special acrylic cleaner. Do not use blade algae scraper.
Prohibited chemicals: Alcohol, acetone, abrasive toothpaste, strong acids and strong bases.
Scale removal: Apply white vinegar to the surface and then wipe. Avoid rough scraping.
Scratch repair: 2000 mesh sandpaper + polishing paste. For deep scratches, contact the manufacturer for flame polishing.
Structural safety inspection: Joints, deformation, bottom frame support.
Other precautions: Sun protection, anti-bump, temperature difference
The cylindrical curved surface structure and the ordinary flat fish tank have significant differences. The curved inner wall is more prone to algae and scale accumulation, and it is difficult to clean like a straight cylinder using conventional algae scraping tools. It is recommended to prioritize the use of acrylic-specific soft magnetic brushes. Before use, be sure to check whether the magnetic block surface is coated with sand and hard particles to avoid creating a series of arc-shaped scratches on the curved surface.
For projects such as hotels and aquariums that are open to the public all year round, it is recommended to establish a standardized monthly inspection ledger: In addition to the surface and joints of the tank body, also check the overflow outlet, pipeline interface, and bottom flange position. These concealed areas are prone to accumulate inorganic salt deposits, and over time, they will gradually erode the bonding seams.
For water replenishment, RO reverse osmosis pure water is recommended. The continuous evaporation of hard water is the fundamental cause of the repeated appearance of white scale on the water level line. Starting from the water source can significantly reduce the frequency of cleaning and reduce the risk of scratches caused by repeated wiping.

The curved inner surface of the cylindrical acrylic tank is a high-risk area where mats of algae, filamentous algae, and black hair algae tend to grow.
Core principle: Prioritize inhibition, gently remove, and completely avoid scratches and chemical corrosion. The hardness of acrylic is much lower than that of glass. Regular hard algae scraping tools and stainless steel scraping blades on the market are strictly prohibited from being used directly on the curved acrylic surface.
The outbreak of moss and algae is essentially a result of the imbalance among light, nutrients, and water quality. The commercial large cylindrical cylinders with curved surface concentrating light have a stronger effect. Localized enrichment of light is highly likely to trigger the growth of algae.
① Light duration, the recommended daily lighting should be controlled within 6–8 hours, avoiding continuous 24-hour illumination;
② Nitrate and phosphate indicators in the water body, regularly test the efficiency of the circulation and filtration system, promptly clean the filter materials to reduce excessive nutrients in the water body;
③ Water replenishment source, hard water sources will accelerate the adhesion of scale + algae, if conditions permit, continuously use RO pure water for replenishment.
Use acrylic-specific soft rubber magnetic brushes, ultra-fine fiber sponges, and non-abrasive soft wiping cloths, slowly wipe in a single direction along the curved surface, do not rub in circles. Before wiping, carefully check the clean contact surface to prevent the inclusion of sand particles and hard impurities. After wiping, simultaneously siphon and remove the fallen algae debris, suspended algae residues left in the water will quickly recur.
Can be treated with a water aquarium-level glutaraldehyde algae remover in a low-dose, targeted manner (strictly follow the water volume ratio, do not exceed the limit), dip a soft brush in the solution and gently apply to the algae, let it stand for a specified period of time, then clean with a soft cloth and replace the water to dilute the residual; do not allow high-concentration chemicals to be directly and for a long time soaked in the acrylic joint position, MMA adhesive joints will accelerate stress cracking and white fogging due to long-term contact with strong algae-eliminating chemicals.
3. Intractable black hair algae: Do not recommend violent grinding. Prioritize reducing light and controlling fertilizer to inhibit; for a small amount of localized stubborn algae, you can use citric acid for gentle wet application to soften, then gently wipe off, after treatment, thoroughly rinse the tank walls and water body with clean water.
❌ Do not use steel wool, hard plastic scrapers, green coarse surfaces of scouring pads, or blades; once scratches occur on the curved surface, subsequent scratch grooves will be more likely to trap algae, creating a vicious cycle.
❌ Do not use products containing bleach, sodium hypochlorite, or strong alkaline substances for algae removal. These chemicals will corrode the acrylic surface, causing irreversible discoloration, silver streak cracking, and also damaging the nitrification system inside the tank, posing a threat to aquatic organisms.
❌ The corners and bonding seams of cylindrical tanks are weak areas. Try to minimize wet application of chemicals at these seams and focus on physical gentle cleaning instead.
Long-term operation suggestions: Commercial marine aquariums and hotel projects can incorporate a regular weekly cleaning plan, with occasional thorough cleaning to prevent thick algae layers from solidifying, significantly reducing the difficulty of subsequent cleaning and the risk of tank damage.

Cleaning an acrylic aquarium cylinder requires gentle handling and the use of appropriate cleaning materials to avoid scratching or damaging the surface. Here are some steps to help you clean your acrylic aquarium cylinder effectively:
You will need the following supplies for cleaning the acrylic aquarium cylinder:
Acrylic-safe cleaning solution: Use a mild, non-abrasive cleaner specifically designed for acrylic surfaces. Avoid using harsh chemicals, ammonia, or abrasive cleaners that can damage the acrylic.
Soft, non-abrasive cloth or sponge: Choose a cloth or sponge made of microfiber or another non-abrasive material to prevent scratching the acrylic.
Distilled water: Distilled water is preferable to tap water as it reduces the risk of leaving mineral deposits or streaks on the acrylic surface.
Bucket or container: Use a clean bucket or container to mix the cleaning solution.
Fill the bucket or container with a mixture of the acrylic-safe cleaning solution and distilled water. Follow the manufacturer's instructions for the appropriate ratio of cleaner to water..
Before cleaning, turn off any equipment such as filters, pumps, or heaters to ensure safety and prevent accidental damage.
Use a fish net or a gentle aquarium vacuum to remove any debris or waste from the aquarium water.
Dip the soft cloth or sponge into the cleaning solution and wring out any excess liquid. Gently wipe down the interior walls of the acrylic cylinder, starting from the top and working your way down. Use light pressure and circular motions to avoid scratching the surface. Pay extra attention to areas with visible dirt or algae growth.
After cleaning, rinse the interior walls of the acrylic cylinder with clean distilled water. This helps to remove any residue from the cleaning solution and prevents streaks or spots.
Clean the exterior of the acrylic cylinder using the same cleaning solution and a separate cloth or sponge. Wipe the exterior surface gently, removing any dirt or smudges.
Finally, rinse the exterior with clean distilled water and dry both the interior and exterior surfaces with a soft, lint-free cloth. Ensure that the acrylic cylinder is completely dry before turning on any equipment or reintroducing fish and other aquatic life.
Regular maintenance and cleaning are essential to keep your acrylic aquarium cylinder looking clear and vibrant. Aim to clean the cylinder at least once a month or as needed, depending on the level of algae growth or debris accumulation. Additionally, avoid using abrasive materials or rough scrubbers that can scratch the acrylic surface.
Start by manually removing as much moss as possible using a soft brush or sponge. Gently scrub the affected areas to dislodge the moss from the acrylic surface. Be careful not to apply too much pressure or scrub too vigorously, as this can scratch the acrylic.
Acrylic-safe moss remover solutions are available in the market. These solutions are specifically designed to break down and remove moss or algae from aquarium surfaces. Follow the manufacturer's instructions for the appropriate dosage and application method. Typically, you will need to dilute the solution in water and apply it to the affected areas using a soft cloth or sponge. Allow the solution to sit for the recommended amount of time, usually a few minutes, to let it work on the moss.
After the moss remover solution has had time to work, gently scrub the affected areas again with a soft brush or sponge. This will help to dislodge any remaining moss. Rinse the acrylic cylinder thoroughly with clean water to remove the moss and any residue from the moss remover solution.
If there are still traces of moss remaining, you may need to repeat the process. Be patient and thorough in your cleaning efforts to ensure all moss is removed.
Maintain proper water conditions: Ensure that the water parameters, such as temperature, pH, and nutrient levels, are suitable for your aquarium inhabitants. Moss tends to thrive in nutrient-rich environments, so monitoring and controlling nutrient levels can help prevent its growth.
Regular maintenance: Perform regular aquarium maintenance, including water changes, cleaning filters, and removing any debris or uneaten food. This helps to reduce the buildup of organic matter that can contribute to moss growth.
Adequate lighting: Moss requires light for photosynthesis. Adjust the lighting in your aquarium to provide the appropriate amount for your specific aquatic plants and inhabitants, while avoiding excessive light that can promote moss growth.
Limit nutrient sources: Avoid overfeeding your fish or adding excessive amounts of fertilizers, as this can contribute to excess nutrients in the water, promoting moss growth. Feed your fish only what they can consume within a few minutes and clean up any uneaten food promptly.
Remember to always follow the instructions provided by the moss remover solution manufacturer and take care not to harm your aquarium inhabitants during the cleaning process.
Small custom acrylic cylindrical aquarium with single-side curved viewing panel
Giant cast acrylic cylindrical aquarium for marine park tropical fish exhibit
Lrge transparent acrylic cylindrical aquarium under installation and sealing construction
Large acrylic fish tanks can be a stunning centerpiece in a living room, dining area, or any other part of a home. They provide a beautiful and calming display of aquatic life, adding a unique touch to the interior decor.
Many offices and corporate spaces incorporate large acrylic fish tanks as a way to create a relaxing and visually appealing environment. The presence of fish and underwater scenery can help reduce stress and improve productivity.
Luxury hotels and resorts often feature large acrylic fish tanks in their lobbies, reception areas, or restaurants. These tanks can create a captivating and tranquil atmosphere for guests, enhancing their overall experience.
Acrylic fish tanks can be used as eye-catching installations in restaurants and bars, providing a unique and memorable dining experience. They can serve as a conversation starter and contribute to the ambiance of the establishment.
Schools, colleges, and universities often use large acrylic fish tanks in their science labs or classrooms. They provide an interactive learning experience, allowing students to observe and study aquatic life up close.
Large acrylic fish tanks are a staple in public aquariums and zoos, where they house a wide variety of aquatic species. These tanks are designed to showcase the beauty and diversity of marine life while providing a safe and comfortable habitat for the animals.
Large acrylic fish tanks can be rented or set up for temporary events, such as trade shows, exhibitions, or weddings. They can serve as a unique and captivating attraction, creating a memorable experience for attendees.
As origin of life, ocean is both fascinating and dangerous to mankind, and this is why Marine Theme Parks are born and created, satisfying curiosity and giving people a good insight into knowledge about Ocean, a better understanding of the ocean, making people to more cherish the environment and protect marine organisms. Leyu Acrylic takes on this role, connecting ‘Marine World’ to human beings. Leyu Acrylic provides and uses large transparent acrylic with a light transmission rate of more than 93% more safely shorten the distance between us and the ocean, bringing customers an excellent sense of experience.
The large Acrylic Window Panels produced by Leyu are not only suitable for Ocean Park, but also themed restaurants, high-end hotels, private villas, and are one of the best designs for creating a sense of romantic atmosphere in modern life. Acrylic is a unique material that offers excellent optical clarity, which can be transformed into a number of different window options. It comes in a variety of shapes, can be flat, curved and other customized shapes you want. And Leyu Acrylic, our highly trained teams are experienced in bending and transforming cast acrylic into various shapes according to designs. With seamless splicing technology, Leyu Acrylic are able to extend acrylic panel infinitely. The longest flat acrylic window produced by Leyu is 12070m long*8200mm high*560mm thick. When standing at the super large window and watching the various fishes through the acrylic, the shock and charm from ocean landscape can not be presented with the camera and language.
Leyu acrylic factory is a history of more than 20 years, set acrylic panel production and sales as one of the large-scale comprehensive company. With the production capacity of ultra thick . With the production capacity of ultra thick acrylic panel, the thickness of the acrylic sheet we produce ranges from 30 mm to 800 mm.
Leyu acrylic factory has a professional and dedicated design and installation management team, from the production of panels to the installation, we always strive for excellence, so far has participated in the production of 50 aquarium projects, never stop our steps. Product packaging using protective film, high quality KT board, export products plus wooden cases or angle steel fixed. In many years of operation and exploration, the establishment of our own quality management system. The company has passed ISO9001:2015 quality system certification and 2001/95/ EC technical report certification, the "Excellent Construction Unit of Nanchang Wanda Cultural Tourism City" and "Best Partner".
27 years of production history, More than 80 aquarium projects.Abundant project experience, LEYU acrylic glass, quite trustworthy
Leyu Acrylic Aquarium factory is the builder of Ocean park hotel, in Sanya, China, many hotels have Ocean Park elements, the hotel has acrylic tunnel, there are large acrylic cylinder, there are large acrylic Windows. It is very comfortable for tourists to stay in such a Ocean Park inn. Therefore, Ocean Park inn is very sought after by tourists.
As of my last update in September 2021, I can provide you with some recommended Ocean park hotel around the world. However, please note that the status of these inns may have changed since then, so it's always a good idea to check recent reviews and availability before making any reservations.
Located right on the beach, this inn offers stunning views of the Pacific Ocean and easy access to the famous Ocean Park, which is a popular Ocean park inn and marine animal park. It's an excellent choice for families and beach lovers.
which is an international famous brand resort hotel with the whole sea world, was officially opened in January 2014.
The tunnels, large Windows and acrylic parts in the hotel are all customized by Leyu Acrylic factory.
This charming inn is situated in a tranquil coastal town near the beautiful Long Beach Peninsula. It's a great spot for nature enthusiasts, with access to sandy beaches, hiking trails, and bird-watching opportunities.
Offering a mix of oceanfront rooms and suites, this resort provides direct access to the beach and is close to various attractions like the Myrtle Beach Boardwalk and SkyWheel.
This hotel is located in the vibrant area of Causeway Bay, close to the famous Victoria Park and many shopping and dining options. While it may not be directly on the beach, it's a convenient choice for travelers looking to explore Hong Kong.
Situated in the coastal suburb of Cottesloe, this inn provides a relaxing stay near the Indian Ocean and the iconic Cottesloe Beach. It's known for its beautiful sunsets and beachfront cafes.
Remember to research Ocean park inn status, amenities, and guest reviews before booking your stay. Enjoy your ocean park adventure!
LEYU is a well-known manufacturer that specializes in custom acrylic aquariums. They are known for their attention to detail, craftsmanship, and ability to create unique and stunning aquarium designs.
LESHENG offers a range of acrylic aquariums known for their clarity, durability, and affordability. They provide various sizes and shapes, making them suitable for both beginners and experienced aquarium enthusiasts.
LEHUI is another reputable manufacturer that produces acrylic aquariums known for their clarity and sleek design. They offer different shapes and sizes, including standard rectangular tanks, bow-front tanks, and hexagon tanks.
LEYU is a manufacturer known for their innovative and visually striking aquarium designs. They specialize in rimless, frameless acrylic aquariums that create the illusion of a seamless aquatic environment.
Leyu acrylic aquarium factory is a manufacturer that focuses on producing high-quality, custom-made acrylic aquariums. They are known for their attention to detail and ability to create unique designs tailored to the customer's preferences.
When selecting an acrylic aquarium manufacturer, it's essential to consider factors such as the size, shape, and design options they offer, as well as the reputation and customer reviews for their products.